Turnigy 9X switch fix and the importance of failsafes
If you have a Turnigy 9X RC transmitter, be sure and keep an eye on the operation of the power switch -- especially if you haven't used the radio for a while.
Unfortunately, the very low-cost switch used in these transmitters tends to suffer from contact oxidation which can result in intermittent operation. A squirt with a good quality contact cleaner and lube (CRC 2-26 works well) and some brisk exercising of the switch will do wonders.
Also, remember that if your RC system has a failsafe capability, *DO* use it. It could save your model and possibly even save a life in the unlikely event that something does go wrong.
Unfortunately, the very low-cost switch used in these transmitters tends to suffer from contact oxidation which can result in intermittent operation. A squirt with a good quality contact cleaner and lube (CRC 2-26 works well) and some brisk exercising of the switch will do wonders.
Also, remember that if your RC system has a failsafe capability, *DO* use it. It could save your model and possibly even save a life in the unlikely event that something does go wrong.
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.