One of the most popular videos on the channel is the demo of how you configure auto-level on a KK2.0 multi-copter board. There is a similar process to trim the MultiWii board.
Things to ensure:
• The board is level
• The accelerometers have been calibrated while the model is level
• You have the auto-level and acro modes configured on the transmitter and board
• You have the throttle reading above 1900ms (confirm using MultiwiiConf)
Process:
With the above in place --
• Fly the model in ACRO mode (i.e. not in auto-level)
• Trim for level flight using the normal trims on the radio
• Click into auto-level
• Note the drift direction
• Click back into ACRO mode and land
• Disarm the motors (THIS IS VERY IMPORTANT!)
• Push the throttle to maximum
• Push the right stick in the direction of the correction needed and return it to the centre (one movement counts as one 'click' of correction)
• Fly the model again and adjust as needed to have level flight in auto-level
I hope this provides useful to those of you that have auto-level that is pulling/drifting. Thanks for watching.
Please comment and subscribe.
Happy flying!
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Auto moto parkas 2021-11-28 SandBOX
HEE Wing F-01 Ultra Delta Wing 690mm - upgraded Mini AR Wing? Diatone Reaper 690