Parts list; I wont post links as links go dead but you will find with google
fpvhobby.com 5v regulator/power distrubution $6.90
FPVhobby.com vtx with cloverleaf 50-100mw vtx (5.8 GHZ AVTX FOR FATSHARK) $39
Picnicquads.com Platform X^3 100 Integrated 8.5mm Frame $10
4X 8.5mm motors with long wires from ebay $5.71
H107C 2mp camera (banggood) $25
808 16 D lens $10.80 (banggood)
other things not included in the price which you may alreadty have:
Hubsan props $1.34
32g SD card (class 4) $12
28 Guage wire $1
Solder (leaded mmmm smell the fumes)
hot glue
time!
total price bind and fly $97.4 (without SD card)
Extras used Spyhawk Tx (part number h102f-01) $89 (note h107D tx will work fine)
Extras to make the video:
hauppauge winTV900 H0006 in conjunction with virtual dub and X264 codec
RC832 32ch 5.8 receiver (34usd)
build time (length of this video!)
enjoy.
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Enduro Rally 2021 - Pabradė military base
Deathstroke 3d printed wearable mask #shorts