A $1.29 FPV diversity controller (improvements)
Part 3 of this series shows how the uber-cheap FPV diversity controller system performs better with the addition of two extra components...
1 x 820K or 1M ohm resistor between pins 3 and 1 of the LM324
1 x 0.1mfd capacitor from pin 3 of the LM324 to ground
1 x 0.1mfd capacitor from pin 2 of the LM324 to ground
With this modification, the diversity controller switches more cleanly and isn't tricked into switching prematurely by very short-term changes in the RSSI levels.
1 x 820K or 1M ohm resistor between pins 3 and 1 of the LM324
1 x 0.1mfd capacitor from pin 3 of the LM324 to ground
1 x 0.1mfd capacitor from pin 2 of the LM324 to ground
With this modification, the diversity controller switches more cleanly and isn't tricked into switching prematurely by very short-term changes in the RSSI levels.
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.