Armattan 258 CNC Quad - Quick overview, review and flight video
After flying, and erjoying, the much smaller Viper quad I've got myself a much larger, more powerful version. This is a quick video to show the main points and to show it in flight.
Thanks to it's builder - Chris (bobepine at RCGroups) for allowing me to include the flight video.
Please post any questions you have.
Specification -
258mm All CNC Alloy
Armattan frame
4 x Hobbyking 20amp ESC
4 x D2822/12, 1800Kv outrunner motors
4 x 7x4.5 props (two R, two L)
KKv2 control board (v1.4 firmware)
Spektrum AR6210 Rx with satellite
Turnigy 3000mah 3s 40c LIPO
Thanks to it's builder - Chris (bobepine at RCGroups) for allowing me to include the flight video.
Please post any questions you have.
Specification -
258mm All CNC Alloy
Armattan frame
4 x Hobbyking 20amp ESC
4 x D2822/12, 1800Kv outrunner motors
4 x 7x4.5 props (two R, two L)
KKv2 control board (v1.4 firmware)
Spektrum AR6210 Rx with satellite
Turnigy 3000mah 3s 40c LIPO
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.