So eine Beschleunigung hatte ich noch nie. Der Quadcopter startet wie eine Rakete in den Himmel. Die Motoren sind an 35A ESC's angeschloßen und werden mit einem 4S LiPo betrieben. Zwar ist der Quadcopter noch nicht fertig aufgebaut, aber jetzt macht er schon spaß. Das Frame ist ein GE220 224mm frame mit 5mm dicken Armen. An den Motoren sind 6050 Kingkong Propeller montiert, die je Motor ein Schub von über 1700 Gramm schaffen!
I had never had such an acceleration. The Quadcopter starts as a rocket in the sky. The motors are connected to 35A ESC's and are operated with a 4S LiPo. Although the Quadcopter is not yet built up, but now he is already fun. The frame is a GE220 224mm frame with 5mm thick arms. With the F60 motors I'm using 6050 Kingkong propellers, which produce a thrust of over 1700 grams per motor!
F60 V2 Motor 2450KV -
RacerStar RS35A V2 ESC -
GE220 frame -
Kingkong 6040 Props -
STM32F4 FC - (old but my)
Omnibus F4 OSD V2 -
GNB LiPo 1500mAh 4S 110C -
5C 12V 3A FPV BEC -
XT60 connectors
FlySky FS-i6X -
FlySky i6AB Receiver -
For more quadcopter parts go to Banggood -
Facebook - /
Blog - /
Youtube -
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
Deathstroke 3d printed wearable mask #shorts
#shorts SnapMaker J1 IDEX 3d printer creation satisfaction