Creating and flying a waypoint "mission", E.T. Vector Waypoint Navigation

I've had a few requests to make this video, so here goes! ;) A quick rundown of creating a flight plan of sorts with the Eagle Tree Vector, then flying the mission. Of course you can do a lot more than the simple setup I did here, but this should give you a pretty good idea of what to expect. Hope you enjoy it, and be sure to like and subscribe and all that. ;)
Latest firmware and revisions history for the Vector (and Micro Vector) -
Eagle Tree's updated waypoints manual can be found here, and covers a lot more detail than I will ever have time to get to in any video, including multirotor-specific options that do not apply to fixed wing -
__
Patreon:
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood -
eBay -
Amazon -
Foxeer -
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps!
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes)
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them:
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above:
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: