FPVGADGETS.COM Propan II Part 2 of 2 (Flight Footage)

This is part 2 of 2, the flight footage. Part one of this review can be found here:
FPVGADGETS.COM - /
Version 1 review:
1.
2.
PZ0420M Camera - /
HS1177 Camera -
Equipment used:
Air:
Skywalker 1900mm airframe (old style, foam tail boom)
RVOSD v5.1 OSD/Autopilot
Dragonlink V2 UHF System
800mW 1.258GHz vTX from RMRC (stock antenna)
PZ0420M flight cam
FPVGADGETS Propan II pan/tilt
RuncamHD (latest firmware, stock settings)
BEVRC Skywalker motor and ESC
9x6 APC-E prop
4S 5000mAh Lipo
Sepic type regulator for 12V gear
Hobbywing 5A UBEC (radio gear)
#16 Keychain cam for view of pan/tilt
Ground:
Tan Racewood 4ch. vRX from RMRC
8dbi tuned patch antenna on a tripod
FPV-Japan DVR
Futaba 10CAP transmitter
19" TV (primary screen)
10" Haier TV (backup screen, in ground station case)
If I missed anything, ask in the comments below! .
__
Patreon:
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood -
eBay -
Amazon -
Foxeer -
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps!
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes)
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them:
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above:
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: