Product description AKK FX3 5.8Ghz 40CH 25mW/200mW/400mW/600mW Switchable FPV VTX with MMCX :
FX3 is similar to the FX2 but has a smaller profile that uses 20x20mm mounting pattern, in the cost of lower max output power, to be designed for smaller micro builds.
This video is short and sweet because there really was nothng more to see than to power and fly the AKK Tek FX3 VTX with MMCX Connector on a drone.
Link to previous introduction video:
AKK MMCX Linear Antenna:
Features:
7-24V input, 5V output for your camera
25mW/200mW/400mW/600mW power switchable
0.01mW parameter-adjusting Mode, power with zero interference
One button setup channel/band/power with LED display
Support OSD Configuring via Betaflight Flight Control Board
Integrated with UART, compatible with Betaflight OSD FC
Specifications:
Input voltage: 7V-24V
Power supply: 5V Camera @ under 0.3A max.
Output power: 25mW: 100mA
200mW: 200mA
400mW: 250mA
600mW: 320mA @12V
Range: Up to 2 km with omnidirectional RHCP antennas
Port connector: JST, 6pin
Antenna connector: MMCX
Dimensions: 26(W)x26(D)mm
Weight:4.6g(excluding antenna)
Package includes:
1x FX3
1x Cable
1x MMCX Antenna
1x Product manual
Product Link:
Amazon
AKK Tech
AKK FX2 5.8Ghz 40CH FPV Transmitter 25mW/200mW/500mW/800mW VTX with MMCX
25mW/200mW/500mW/800mW power switchable
Support OSD Configuring via Betaflight Flight Control Board
7-24V input and can be provides 5V output for your camera.
Filtered power ensure super clean video, born for racing. One button frequency and power setup.
0.01mW power with zero interference,Compatible with Betaflight OSD FC
Product description AKK FX2 5.8Ghz 40CH FPV Transmitter 25mW/200mW/500mW/800mW VTX with MMCX
Enhanced heat dissipation, Lower current than other branded vtx , Higher power consumption available for long range flying(up to 5KM), Lc filter gurantee a clean video, One cool feature about this VTX is that you can mount it on top of your FC/PDB stack thanks to the 30x30mm mounting pattern.
Features:
5V output for your camera
0.01mW power with zero interference
25mW/200mW/500mW/800mW power switchable
One button setup channel/band/power with LED display
Support OSD Configuring via Betaflight Flight Control Board
LC Filtered power ensure super clean video, born for racing.
Integrated with Microphone and UART, compatible with Betaflight OSD FC
Specifications:
Input voltage: 7V-24V
Power supply: 5V Camera @ under 0.3A max.
Output power: 25mW: 100mA
200mW: 180mA
500mW: 250mA
800mW: 300mA @12V
Range: Up to 4 km with omnidirectional RHCP antennas
Port connector: JST, 6pin
Antenna connector: MMCX
Dimensions: 36(W)x36(D)mm
Weight:7.6g(excluding antenna)
Package includes:
1x FX2
1x Cable
1x MMCX Antenna
1x Product manual
Product Link:
Amazon
AKK Tech
My Links
Please Subscribe!
Join Fullscreen, INC the best Youtube MCN
My Instagram: /
MyTwitter:
MySpace:
Add me on Google+:
My Youtube Channel:
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.
#shorts SnapMaker J1 IDEX 3d printer creation satisfaction
HEE Wing F-01 Ultra Delta Wing 690mm - upgraded Mini AR Wing? Diatone Reaper 690