Hyperbaby Computer Setup Using the KISS CC AIO
Took me a few tries, but after learning the KISS GUI this was actually quite simple to set up.
I forgot to show, but you need to reverse motors 4 and 2 if you soldered all the wires straight. Swap 2 wires or solder the JP1 pads together on those ESCs.
Enjoyed the video? Perhaps consider supporting me on Patreon.
~~Parts~~
[Frame] Hyperbaby :
[Motors] BH1407 3600kv :
[FC+ESCs] KISS AIO Compact CTRL :
[VTX] Rush V1.1 :
[FPV Cam] RunCam Swift RR Edition :
[Receiver] FrSky XM+ :
[Props]
RaceKraft 3076 :
Lumenier 3040X3 :
RaceKraft 3030X4 :
Check me out on Instagram!
/
I forgot to show, but you need to reverse motors 4 and 2 if you soldered all the wires straight. Swap 2 wires or solder the JP1 pads together on those ESCs.
Enjoyed the video? Perhaps consider supporting me on Patreon.
~~Parts~~
[Frame] Hyperbaby :
[Motors] BH1407 3600kv :
[FC+ESCs] KISS AIO Compact CTRL :
[VTX] Rush V1.1 :
[FPV Cam] RunCam Swift RR Edition :
[Receiver] FrSky XM+ :
[Props]
RaceKraft 3076 :
Lumenier 3040X3 :
RaceKraft 3030X4 :
Check me out on Instagram!
/
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.