Best Way To Charge Your Tiny Whoop 1S Batteries

►ZMR Charger: (Buzzer version)
►KingKong 1S Charger:
►BetaFPV 1S Charger:
►ISDT BG-8S:
►11% off coupon - toysho (Valid for new users)
►BG Flash Deals:
►BG Coupons Page:
►Banggood App:
╔════╡My Gear╞═════════════════════╡
║ ►Goggles - FatShark HD3 -
║ ►RX Module - Furious True-D:
║ ►Radio - Taranis X9D-
║ ►Battery Charger - ISDT D2:
╚════════════════════════════════╡
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ →
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I Really Appreciate Your Support!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Find Me On Facebook
►
Instagram:
►/
Description (From Banggood):
6 In 1 3.7V 1S Lipo LiHv Battery Charger Board For Inductrix 3.7V KINGKONG Tiny 6 Eachine QX65 E010 E011 E013
Description:
- Supports 1.25, 2.0mm battery
- Supports LiHv 4.35v battery
- Supports 6 Batteries charged at the same time
- The display shows the each channel input and output voltage in order.
- Charge at either 200mA or 600mA according to the setting of a switch that can be set independently for each port.
- 2-6S(6V-25.2V)as power suuply or use adapters with at least 2A battery output.
LED Indicator: Charging- Always bright
Full charged- Flashing
Size: 153*16*5.8mm
Weight: 15g
Note: Doesn't include batteries.
Package included:
1 x Battery Charger Board
1 to 6 1S Lipo Battery Parallel Charger Board XT60 Input with Dual BEC for Eachine E010 Tiny Whoop
Description:
This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter as supply power so you can continuously charge at home.
Once supplied with a 3s or 4s battery, just plug your 1s batteries into the charger to start charging. When you connect a discharged 1s battery to the charger the corresponding ports LED light will turn red until the battery is fully charged. Once charged, the LED will turn green and you can remove your 1s battery and fly!
Specifications:
Weight: 36g
​Dimensions: 75x42x17mm
​Input: 3s - 4s Selectable
Cutoff Voltage: 10.8v (3s), 14.4v (4s)
Output: Fixed at ~400 milliamps
4.20v cell charging cutoff (+- 0.5% margin of error)
Features:
- Charge 1S Lipo batteries (4.2V) and HV Lipo batteries (4.35V) at once in the same board by a selectable switch.
- XT60 Input (3s or 4s) for field charging.
- Support charge up to 6 pcs batteries with Picoblade 1.25 or JST PH2.0 power plug at once.
- Individual charging per ports, not parallel.
- Turns itself off when supply battery reaches safe low-voltage.
- 2 channels BEC for supply current. 400mAh current per charge port
- LED lights indicate when each battery is done charging
- Support AC Wall Adapter (Input: 100-240V AC 50/60Hz, Output : 12V 3.0A) Not Included!
Note:
Ports are numbered 1-6. Do not put more than one battery on a single port. For example: do not insert one battery on the Picoblade 1.25 plug and another on the same port with the PH 2.0 plug.
Package Included:
1 x 1S Lipo LiHV Charger Board