Durafly Bonanza 950mm from Hobbyking Unboxing and Build

Get one here at HobbyKing:
Follow on Facebook:
That's right! The NEW Durafly Bonanza! Classic lines with the V tail, no landing gear, so this is a hand launch airplane. But with 3/4 throttle and a underhand toss its an easy takeoff. You'll see in the next video!
Subscribe for the flight video! Its coming up next!
The build was very easy, video is a little long, but I share some tips and making things fit, and setup, so its worth it.
The Durafly Bonanza is based on the late 1940’s civilian aircraft the Beechcraft Bonanza. With a low wing and a wingspan of only 950mm, this is a plane that you can take anywhere. Durafly has designed it as an easy hand launcher.
It is built of superbly finished, tough EPO and comes with stickers already applied. All electrics are pre-installed, just fit your receiver and battery. For better control, Durafly has fitted ball links on all control surfaces. The Bonanza is ready to "Throw it and Show it"
The Bonanza has a big wing that makes it a stable flier, but has heaps of power and will easily do the major tricks, loops and rolls, with poise. After a successful flight, you can slow down and float in for a stress-free belly landing.
Round up your mates and get flying now with the Durafly Bonanza.
Features:
• Quick, easy assembly
• Superbly finished, highly compressed EPO construction
• Hand launch, belly landing
• 4 Channels (ailerons, elevator, rudder (V-Tail), throttle)
• Ball links for control surfaces
• Strong, fully molded plastic cowl and belly skid
• Full 4 channel control: Elevator, rudder, throttle and aileron
• V-Tail tailplane
• Aileron servo covers
Specs:
Wingspan: 950mm (37.4")
Length: 650mm (25.6")
Flying Weight: 540g (19.5oz) (inc all electronics and battery)
Servo: 9g x 4
ESC: 20A
Motor: 1300KV
Propeller: 7x5
Suggested battery: 3S 1300mAh
CG position: 70mm +/- 5mm
Control surface throws: ±8mm
Required:
Minimum 4ch Transmitter capable of V-Tail mixing
Appropriate 4ch receiver
1 x 1300mAh 3S LiPo battery
Note: Manual can be found in the "Files" tab on the website: