Fatshark DVR Update - Side By Side Comparison (RapideFire & TrueD)
► Fatshark HDO:
- 15% Off coupon: e2bcea
► Modules:
- Furious True-D: (Firmware - 3.8)
- RapidFire: (Firmware: v1.2.4)
* Testing method:
- RX modules (2 of each - RF and TD) were mounted on 2 FuriousFPV Dock King units.
- Same antennas were used on each module.
- The DVR unit of the HD3 goggles was updated to version 1.2a and the DVR of the HDO was flashed with the stock version (v1.1).
- FPV camera:
- VTX: (5740 - 25mw)
►Antennas on RXs:
- ||
-
►DVR Update Download:
► How to update your DVR?
- First make sure that your DVR unit is compatible!
-1. Format a micro SD card using the in-goggle DVR menu
2. Power down your goggles
3. Using your computer, place the supplied C RESFW.BIN file in the
root of the SD card. Ensure that the SD card write is complete
(ideally eject the card cleanly) before removing.
4. Install the SD card into the goggles
5. Power up the goggles, wait for a bunch of flashing.
DO NOT REMOVE THE CARD, OR POWER, WHILE THIS IS
HAPPENING
6. When the flashing stops, and the LED turns off, remove power and wait for about 15 seconds.
7. Power up the goggles, and verify that the DVR still works
Note that the firmware file will be removed during installation, so no need to remove it manually
- 15% Off coupon: e2bcea
► Modules:
- Furious True-D: (Firmware - 3.8)
- RapidFire: (Firmware: v1.2.4)
* Testing method:
- RX modules (2 of each - RF and TD) were mounted on 2 FuriousFPV Dock King units.
- Same antennas were used on each module.
- The DVR unit of the HD3 goggles was updated to version 1.2a and the DVR of the HDO was flashed with the stock version (v1.1).
- FPV camera:
- VTX: (5740 - 25mw)
►Antennas on RXs:
- ||
-
►DVR Update Download:
► How to update your DVR?
- First make sure that your DVR unit is compatible!
-1. Format a micro SD card using the in-goggle DVR menu
2. Power down your goggles
3. Using your computer, place the supplied C RESFW.BIN file in the
root of the SD card. Ensure that the SD card write is complete
(ideally eject the card cleanly) before removing.
4. Install the SD card into the goggles
5. Power up the goggles, wait for a bunch of flashing.
DO NOT REMOVE THE CARD, OR POWER, WHILE THIS IS
HAPPENING
6. When the flashing stops, and the LED turns off, remove power and wait for about 15 seconds.
7. Power up the goggles, and verify that the DVR still works
Note that the firmware file will be removed during installation, so no need to remove it manually
Mdp.lt is not the owner of this text/video/image/photo content, the real source of content is Youtube.com and user declared in this page publication as Youtube.com user,
if you have any question about video removal, what was shared by open community, please contact Youtube.com directly or report bad/not working video links directly to video owner on Youtube.com. Removed video from Youtube.com will also be removed from here.