RunCam Eagle 2 Review

Here's the new Eagle 2, an improved version of the Eagle from RunCam. It's pretty much the Eagle, with some changes for the better. The issues that were present in the Eagle are corrected and results in a really nice camera!
I should also mention that this is the 16:9 version, I forgot to point that out in the video. ;)
These are the settings I used. Everything is stock settings out of the box unless mentioned here:
Sharpness: Manual, set to "4"
Saturation: Manual and maxed out
Brightness: One or two steps below the default settings of 36, if I remember right it was set to 28
Buy one here:
__
Patreon:
You can help to support my channel by using the affiliate links below when making a purchase:
Banggood -
eBay -
Amazon -
Foxeer -
You can also make a donation if you wish to do so at the following link:
Support my channel and my efforts to bring you better content, every little bit helps!
Here's some affiliate links to the video gear I use from Ready Made R/C:
1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes)
I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them:
I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above:
On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: